Pär Jönsson

Students73

• Hedda Pousette“Study of properties of hydrogen-reduced DRI related to steelmaking”2026 · KTH · doctoral
• Yanghao Jin“Biomass-Derived Hard Carbon Anodes for Sodium-Ion Batteries”2026 · KTH · doctoral
• Ziyi Shi“Catalytic Graphitization of Bio-based Carbon Precursors”2026 · KTH · doctoral
• José Juan Bolívar Caballero“Catalyst Development and Distributed Electrified Heating in Reforming Processes for Efficient Renewable Syngas and Fuel Production”2025 · KTH · doctoral
• Julia Brännberg Fogelström“Reduction of industrial hematite pellets using hydrogen and some of its impacts on steelmaking”2025 · KTH · doctoral
• Samina Gulshan“Catalytic Pyrolysis of Waste Electrical and Electronic Equipment (WEEE)”2025 · KTH · doctoral
• Arun Kamalasekaran“Solid-state hydrogen reduction of metal oxide mixtures and an industrial by-product to produce metals and homogeneous alloys”2025 · KTH · doctoral
• Amanda Vickerfält“A study of an autogenous slag for steel production with consideration of possible vanadium extraction”2024 · KTH · doctoral
• Reinol Josef Compañero“Recirculation of scrapped resources”2024 · KTH · doctoral
• Oscar Hessling“Some aspects of hydrogen reduction of iron ore”2024 · KTH · doctoral
• Joar Huss“A study of the autogenous Hydrogen-DRI slag and its impact on the dephosphorization of fossil-free steel at different oxygen potentials”2023 · KTH · doctoral
• Shahin Akbarnejad“Mathematical and Experimental Study on Filtration of Solid Inclusions from Molten Aluminium and Steel”2023 · KTH · doctoral
• Reza Safavi Nick“Modelling Approaches of Multiphase Phenomena Focusing on an Integrated Steelmaking Route”2023 · KTH · doctoral
• Wenjing Wei“Decarbonising the Stainless Steelmaking through Alloy Solutions”2023 · KTH · doctoral
• Hanmin Yang“Sustainable valorization of Biomass into Syngas/H₂ via Biocarbon catalyst”2023 · KTH · doctoral
• Mattia De Colle“Experimental studies to overcome the recycling barriers of stainless-steel and BOF slags”2022 · KTH · doctoral
• Yuming Wen“Towards a Sustainable Biomass and Waste Refinery Based on Pyrolysis Combined with a Pretreatment Process”2022 · KTH · doctoral
• Jun Yin“A study of mold flux entrapment and gas entrainment in an ingot casting process”2021 · KTH · doctoral
• Katarzyna Jagodzińska“Energy and material recovery from high-ash waste through pyrolysis”2021 · KTH · doctoral
• Ilman Nuran Zaini“Enhancing the circular economy: Resource recovery through thermochemical conversion processes of landfill waste and biomass”2021 · KTH · doctoral
• Munir Al-Saadi“Thermomechanical Processing of Nickel-Base Alloy 825”2021 · KTH · doctoral
• Leo Carlsson“Applied Machine Learning in Steel Process Engineering”2021 · KTH · doctoral
• Devy Kartika Ratnasari“Enhanced Catalytic Pyrolysis of Biomass for High-Quality Biofuel Production”2021 · KTH · doctoral
• Eva Sjöqvist Persson“On the Origin and Distributions of the Inclusions in Production-scale ESR and PESR Remelted Ingots and Materials from Different Ingot Sizes and Solidification Structures”2021 · KTH · doctoral
• Yong Wang“Characterization of Impurities in Different Ferroalloys and Their Effects on the Inclusion Characteristics of Steels”2021 · KTH · doctoral
• Hongying Du“Evaluations of Non-metallic Inclusionsin Ca-treated Steels and Their Effect on the Machinability”2021 · KTH · doctoral
• Tova Jarnerud“Application of Wastes from Pulp and Paper Industries for Steelmaking Processes”2021 · KTH · doctoral
• Fredrik Persson“A Study of Parameters and Properties Influencing the Size, Morphology and Oxygen Content of Water Atomized Metal Powders”2021 · KTH · doctoral
• Shule Wang“Pyrolysis of Biodegradable Waste for Negative Carbon Emissions”2021 · KTH · doctoral
• Kristofer Bölke“IronArc a New Process for Pig Iron Production”2020 · KTH · doctoral
• Tong Han“Catalytic <em>pyrolysis of lignin to produce fuels and functional carbon materials </em>”2020 · KTH · doctoral
• Yu Liu“Thermodynamics and Kinetics in Metallurgical Processes - with a Special Focus on Bubble Dynamics”2020 · KTH · doctoral
• Arash Safavi Nick“Pores, inclusions and electromagnetic stirring”2020 · KTH · doctoral
• Sebastian Kohlstädt“On determining lost core viability in high-pressure die casting using Computational Continuum Mechanics”2019 · KTH · doctoral
• Péter Svidró“On the Mechanisms of Volume Change Related Casting Defects Formation in Lamellar Graphite Iron”2018 · KTH · doctoral
• Takanori Yoshioka“Parameters influencing inclusion compositions in Al-killed steel melts during a secondary refining process”2018 · KTH · doctoral
• Hans Kellner“Study of Non-metallic Inclusion in Alloy 825”2017 · KTH · doctoral
• Peter Samuelsson“Management of technology in the process industries:  Matching market and machine”2017 · KTH · doctoral
• Jennie Svensson“An Experimental Study to Improve the Casting Performance of Steel Grades Sensitive for Clogging”2017 · KTH · doctoral
• Niclas Ånmark“Steel characteristics and their link to chip breaking and tool wear in metal cutting”2016 · KTH · doctoral
• Johan Ekengård“Slag/Metal Metallurgy in Iron and Steel Melts”2016 · KTH · doctoral
• Haitong Bai“A Study of the Swirling Flow Pattern when Using TurboSwirl in the Casting Process”2016 · KTH · doctoral
• Hailong Liu“A Study of the Particle Transport Behavior in Enclosed Environments”2016 · KTH · doctoral
• Karin Steneholm“The Effect of Ladle Treatment on Steel Cleanness in Tool Steels”2016 · KTH · doctoral
• Yonggui Xu“A Study of Bubble and Inclusion Behaviors in a Liquid Steel Bath”2016 · KTH · doctoral
• Changji Xuan“Wettability and Agglomeration Characteristics of Non-Metallic Inclusions”2016 · KTH · doctoral
• Wangzhong Mu“Microstructure and Inclusion Characteristics in Steels with Ti-oxide and TiN Additions”2015 · KTH · doctoral
• Peiyuan Ni“A Study on Particle Motion and Deposition Rate”2015 · KTH · doctoral
• Junfu Bu“Advanced BaZrO₃-BaCeO₃ Based Proton Conductors Used for Intermediate Temperature Solid Oxide Fuel Cells (ITSOFCs)”2015 · KTH · doctoral
• Jing Wang“Development of Graphitic Carbon Nitride based Semiconductor Photocatalysts for Organic Pollutant Degradation”2015 · KTH · doctoral
• Aliaksandr Alevanau“Study of pyrolysis and gasification of biomass from the self-organization perspective”2015 · KTH · doctoral
• Chao Chen“Some Aspects on Macroscopic Mixing in a Tundish”2015 · KTH · doctoral
• Diana Janis“A Study of Different Methods for Inclusion Characterization towards On-line use during Steelmaking”2015 · KTH · doctoral
• Hillary Kasedde“Towards the Improvement of Salt Extraction from Lake Katwe Raw Materials in Uganda”2015 · KTH · doctoral
• Ying Yang“Inclusion Motion under a Swirl Flow in the Continuous Casting Process and Wire Feeding in the Induction Furnace”2015 · KTH · doctoral
• Xiaobin Zhou“Mathematical and Physical Simulations of BOF Converters”2015 · KTH · doctoral
• Mitra Basirat“Microstructural Evolution In As-cast Alloys during Plastic Deformation”2013 · KTH · doctoral
• Qiang Liu“Microstructure Evaluation and Wear-Resistant Properties of Ti-alloyed Hypereutectic High Chromium Cast Iron<em></em>”2013 · KTH · doctoral
• Zhili Jack Song“Modeling of Gas Flows in Steelmaking Decarburization Processes”2013 · KTH · doctoral
• Zhe Tan“Some Aspects of Improving Initial Filling Conditions and Steel Cleanliness by Flow Pattern Control Using a Swirling Flow in the Uphill Teeming Process”2013 · KTH · doctoral
• Arashk Memarpour“An Experimental Study of Submerged Entry Nozzles (SEN) Focusing on Decarburization and Clogging”2011 · KTH · doctoral
• Saman Mostafaee“A Study of EAF High-Chromium Stainless Steelmaking Slags Characteristics and Foamability”2011 · KTH · doctoral
• Ola Ericsson“An Experimental Study of a Liquid Steel Sampling Process”2010 · KTH · doctoral
• Jesper Janis“Inclusions and/or Particles Engineering for Grain Refining Purposes in Ferritic Fe-20mass%Cr alloys”2010 · KTH · doctoral
• Ismail Kasimagwa“A study of slag corrosion of oxides and oxide-carbon refractories during steel refining”2010 · Högskolan Dalarna · doctoral
• Zhi Zhang“On the Study of a Liquid Steel Sampling Process”2010 · KTH · doctoral
• Hamid Doostmohammadi“A Study of Slag/Metal Equilibrium and Inclusion Characteristics during Ladle Treatment and after Ingot Casting”2009 · KTH · doctoral
• Mikael Ersson“Fundamental Experimental and Numerical Investigation Focusing on the Initial Stage of a Top-Blown Converter Process”2008 · KTH · doctoral
• Johan Björklund“Thermodynamic Aspects on Inclusion Composition and Oxygen Activity during Ladle Treatment”2008 · KTH · doctoral
• Sune Jansson“A Study on the Influence of Steel, Slag or Gas on Refractory Reactions”2008 · KTH · doctoral
• Jenny Wikström“A Mathematical and Experimental Study of Inclusion Behaviour at a Steel-Slag Interface”2007 · KTH · doctoral
• Joel Gustavsson“Reactions in the Lower Part of the Blast Furnace with Focus on Silicon”2004 · KTH · doctoral
• Mats Söder“Growth and removal of inclusions during ladle refining”2004 · KTH · doctoral